INS_CNGE28FX4TX24MS(2,POE2/48)
04/30/18 PAGE 86
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX24MS(2,POE2/48)
TECH SUPPORT: 1.888.678.9427
Port Settings
The Port Settings page allows you to configure the port and the type of storm control association
along with the value of the storm rate for the selected port.
To access this page, click Security > Storm Control > Port Settings.
Figure 4-56. Security > Storm Control > Port Settings
Table 4-54. Security > Storm Control > Port Settings
Item
Description
Port
Enter the port number to designate the local port for the Storm Control function.
Port State
Select Disabled or Enabled to define the port state
Action
Click the drop-down menu to select the type of action to designate for the selected port
during a Storm Control incident. The options are Drop and Shutdown.
Type Enable
Click the radio button to enable Broadcast, Unknown Multicast, or Unknown Unicast
Broadcast: Select the variable in Kbps to define the broadcast bandwidth.
Unknown Multicast: Select the variable in Kbps to define the multicast setting.
Broadcast: Select the variable in Kbps to define the unknown unicast setting.
Apply
Click Apply to save the values and update the screen.
The ensuing table for Storm Control Port Information settings are informational only: Port, Port
State, Broadcast (Kbps), Unknown Multicast (Kbps), Unknown Unicast (Kbps) and Action.
