INS_CNGE28FX4TX24MS(2,POE2/48)
04/30/18 PAGE 46
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX24MS(2,POE2/48)
TECH SUPPORT: 1.888.678.9427
Table 4-12. System > System Time
Item
Description
Enable SNTP
Click the radio button to enable or disable the SNTP.
SNTP/NTP Server
Address
Enter the address of the SNTP server. This is a text string of up to 64 characters
containing the encoded unicast IP address or hostname of a SNTP server. Unicast
SNTP requests will be sent to this address. If this address is a DNS hostname,
then that hostname should be resolved into an IP address each time a SNTP
request is sent to it.
SNTP Port
Enter the port on the server to which SNTP requests are to be sent. Allowed
range is 1 to 65535 (default: 123).
Manual Time
Click the drop-down menus to set local date and time of the system.
Time Zone
Click the drop-down menu to select a system time zone.
Daylight Saving Time
Click the drop-down menu to enable or disable the daylight saving time settings.
Daylight Saving Time
Offset
Enter the offsetting variable in seconds to adjust for daylight saving time.
Recurring From
Click the drop-down menu to designate the start date and time for daylight
saving time.
Recurring To
Click the drop-down menu to designate the end date and time for daylight saving
time.
Non-Recurring From
Click the drop-down menu to designate a start date and time for a non recurring
daylight saving time event.
Non-Recurring To
Click the drop-down menu to designate the end date and time for a non recurring
daylight saving time event.
Apply
Click Apply to save the values and update the screen.
The ensuing table for System Time Information settings are informational only: Current Date/Time,
SNTP, SNTP Server Address, SNTP Server Port, Time zone, Daylight Saving Time, Daylight Saving
Time Offset, From and To.
