INS_CNGE28FX4TX24MS(2,POE2/48)
04/30/18 PAGE 52
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX24MS(2,POE2/48)
TECH SUPPORT: 1.888.678.9427
LACP Priority Settings
The LACP Priority Settings page allows you to configure the system priority for LACP.
To access this page, click L2 Switching > Link Aggregation > LACP Priority Settings.
Figure 4-20. L2 Switching > Link Aggregation > LACP Priority Settings
Table 4-18. L2 Switching > Link Aggregation > LACP Priority Settings
Item
Description
System Priority
Enter the value (1-65535) to designate the LACP system priority.
Apply
Click Apply to save the values and update the screen.
The ensuing table for LACP Information settings are informational only: System Priority.
LACP Port Settings
Link Aggregation Control Protocol (LACP) provides a method to control the bundling of several
physical ports together to form a single logical channel. By configuring the LACP function, the
switch can negotiate an automatic bundling of links by sending LACP packets to the peer device
(also implementing LACP).
To access this page, click L2 Switching > Link Aggregation > LACP Port Settings.
Figure 4-21. L2 Switching > Link Aggregation > LACP Port Settings
