INS_CNGE28FX4TX24MS(2,POE2/48)
04/30/18 PAGE 118
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX24MS(2,POE2/48)
TECH SUPPORT: 1.888.678.9427
SNMP Trap
The SNMP Trap page allows you to set the IP address of the node and the SNMP credentials
corresponding to the version that is included in the trap message.
To access this page, click Management > SNMP > SNMP Trap.
Figure 4-88. Management > SNMP > SNMP Trap
Table 4-86. Management > SNMP > SNMP Trap
Item
Description
IP Address
Enter the IP address to designate the SNMP trap host.
Community Name Click the drop-down menu to select a defined community name.
Version
Click the drop-down menu to designate the SNMP version credentials (v1 or v2c).
Add
Click Add to save the values and update the screen.
The ensuing table for Trap Host Status settings are informational only: No., IP Address, Community
Name, Version and Delete (click to delete the desired IP address).
