IE-SNC-P86xx-01
12
Setup via Telnet
Using a text interface Telnet at
port 9999
can be the device configured. It is possible to
change any settings as well as using TSensor software. The Telnet is good if you need to
made configuration from operation system where can not be installed TSensor software
(Linux, Mac OS). On operating systems Windows 7 and Windows Vista is not Telnet
included at standard installation, but you can install it in Control panels.
Access to the Telnet settings can be password protected. If any item in Telnet interface is
not confirmed more than 5 minutes, Telnet automatically ends and the device will be
restarted. Previous changes would not saved. To save values is necessary to confirm the
changes by selecting
Save and exit
. During setup via Telnet is no guaranteed that the
device works with correct configuration. These values are set after each quit Telnet
interface.
Telnet interface is controlled using the command line. You will get to each item by pressing
0-9 keys and Enter
. Telnet always lists the current value. If you do no want to change, go
to next item by key
Enter
. Specifying an empty string (e.g. e-mail addresses) is best done
by pressing
Space bar
, then
Backspace
to delete and press
Enter.
Summary of Contents for P8610
Page 26: ...IE SNC P86xx 01 26...
Page 27: ...IE SNC P86xx 01 27...
Page 28: ...www cometsystem cz...
