Comet System P8610, User Manual

Page: 9 / 28

IE-SNC-P86xx-01
9
after changing IP address device is restarted and new IP address is assigned.
Restart of the device takes about 10 seconds.
connect to device using TSensor software and check the measured values. If
P8631 Transducer values are not displayed, it’s necessary to find probes using
button Search probes .
set the other parameters (alarm limits, SMTP server, etc.). Settings are saved
after click on button Save changes .
Checking functions
The last step is to check measured values on the device website. In the address bar of the
web browser, enter the device IP address. If the default IP address was not changed, then
insert
http://192.168.1.213 .
Displayed web page lists actual measured values. If the web pages are disabled, you can see
text
ACCESS DENIED . If the measured value exceeds the measurement range or probe
is not correctly installed, then is shown Error1 value. If the channel is switched off, the
web site displayed OFF instead of the value.