IE-SNC-P86xx-01
21
Basic parameters
Supply voltage:
power over Ethernet according to IEEE 802.3af, PD Class 0 (max.
15.4W), voltage from 36V to 57V DC. For PoE are used pairs 1, 2,
3, 6 or 4, 5, 7, 8.
or DC voltage from 4.9V to 6.1V, coaxial connector, 5x 2.1mm
diameter, positive pole in the middle, min. 250mA
Consumption:
~ 1W depending on the operating mode
Protection:
IP30 case with electronic
Measuring interval:
2s
Accuracy P8610:
±0.8°C in temperature range from -10°C to +60°C
±2.0°C in temperature range from -10°C to -20°C
Accuracy P8631 (depending on used probe – e.g. probe DSTR162/C parameters):
±0.5°C in temperature range from -10°C to +80°C
±2.0°C in temperature range from -10°C td -40°C
Resolution:
0.1°C
P8610 temperature measurement range:
-20°C to +60°C
P8631 temperature measurement range (limited by temperature range of used probe):
-55°C to +80°C
Recommended probe P8631:
DSTR162/C or DSTGL40/C max. length 10m
Wiring Cinch connector P8631:
DS18B20 DQ pin to connector pin, VDO and GND connect to
the connector shield
Communication port:
RJ45 connector, 10Base-T/100Base-TX Ethernet
Recommended Connector Cable:
for industrial use is recommended Cat5e STP cable, in less
demanding applications can be replaced by Cat5 cable, maximum
cable length 100m
Summary of Contents for P8610
Page 26: ...IE SNC P86xx 01 26...
Page 27: ...IE SNC P86xx 01 27...
Page 28: ...www cometsystem cz...
