Comdial CONVERSip EP100 User Manual Download

Page: 43 / 132

CONVERSip EP100 User

Sept

‘04

Comdial

3.6.2 CAMPING ON - BUSY STATION, WAIT FOR AN

ANSWER (CALL WAITING)

If the telephone you have called is busy, you can send a call-waiting
tone to the telephone and wait on the line for an answer (you must be
using the handset for this feature to work).

To activate call waiting when you hear a busy signal,

1. Dial *6 (called party hears tone).
2. Wait on line for a reply.
3. The called party can place the current call on hold, disconnect

from the call to answer your call-waiting tone, or choose to
ignore your call-waiting tone and continue the current conver-
sation.

To cancel call waiting,

1. Press INTERCOM and dial #6.
2. Hang up or press SPEAKER to end.

To answer a call-waiting tone if you receive one while on a call,

1. Hear short tone burst in receiver.
2. Place current call on hold, OR complete call and hang up

(waiting call rings at your telephone).

Summary of Contents for CONVERSip EP100





































































































































Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands

Comdial CONVERSip EP100, User Manual

Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands