Comdial CONVERSip EP100, User Manual

Page: 53 / 132

CONVERSip EP100 User
Sept
‘04 Comdial 55
8. Select outbound line (press line button, dial appropriate code,
or do nothing and let previously selected line remain in effect).
If you want to change the destination, you must enter some-
thing for the outbound line. (See Section 7.2,
Line Groups for
line access codes.)
9. Select forward destination (dial number, press speed dial but-
ton, or do nothing and let previously selected destination
remain in effect).
10. Press SPEAKER to end (display shows CFOS and type of for-
warding).
To deactivate CFOS, choose one of the following:
1. Press INTERCOM and dial *56 OR,
2. Select OPTIONS.
3. Select NEXT until CFWD appears.
4. Select CFWD.
5. Select CLR.
To join an active CFOS call from the CFOS-enabled station, note
flashing HOLD light indicating active CFOS call, and press TAP.
Join CFOS-forwarded party and CFOS destination in a conference
call.
* Comdial has taken reasonable steps in the design of all product
features, including CFOS, which protect against unauthorized or
fraudulent access to, or use of, a system, or which protect against
unauthorized, fraudulent or unaccounted-for access to, or use of,
long distance lines. However, no system is entirely invulnerable or
immune from unauthorized or fraudulent access or use, or unac-
counted-for access or use, and therefore Comdial disclaims any and
all liability, and makes no warranty, express or implied, relating to
unauthorized or fraudulent access or use, or unaccounted-for access
or use.