Comdial CONVERSip EP100 User Manual Download Page 65

Page: 65 / 132

CONVERSip EP100 User

Sept

‘04

Comdial

5.2 Message Waiting Light and

Messaging

If the system installer designates your EP100 to have message-wait
originate ability, you can turn on the message-waiting light of any
other telephone.

To turn on the message-waiting light (and a broken dial tone, if
installer programmed) at another station that is idle or busy,

1. Press INTERCOM.
2. Dial *3.
3. Dial extension number or press DSS/BLF button of station to

be alerted. The message-waiting light of called station flashes.

You can also turn on the message-
waiting light and broken dial tone at
another station when that station is busy,

1. Hear the busy tone and remain on

the line.

2. Select MSG.
3. Hang up.

To turn off the message waiting light at a busy or idle station,

1. Press INTERCOM.
2. Dial #3.

LCD MESSAGE LIST

(Write the attendant supplied messages here.)

Dial Code

Message

Calling J Smith

CALLBK

MSG

Leaving a LCD Message

Summary of Contents for CONVERSip EP100





































































































































Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands

Comdial CONVERSip EP100, User Manual

Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands