Comdial CONVERSip EP100 User Manual Download Page 91

Page: 91 / 132

CONVERSip EP100 User

Sept

‘04

Comdial

7.10 Default Volume Control

You can set a permanent loudness level for any volume control
setting. The level will remain at this volume (referred to as the
default setting) until you change the setting.

To set a permanent speaker, headset, handset, or group listening
loudness for all future calls,

1. Press INTERCOM.
2. Activate speaker, headset, handset, or group listen mode to be

affected.

3. While in that mode, press VOLUME Up or VOLUME Down

button to adjust loudness.

4. Dial **7 or press programmed SAVE button to hold the loud-

ness at the last setting for all future calls (until you change the
default again).

5. Repeat this procedure in each mode until you’ve set all default

volume levels.

7.11 Programmed Button Display

7.11.1 BUTTON FUNCTIONS DISPLAY (BUTTON

QUERY)

You can cause the display to identify the function of each button on
your telephone.

Summary of Contents for CONVERSip EP100





































































































































Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands

Comdial CONVERSip EP100, User Manual

Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands