Comdial CONVERSip EP100 User Manual Download

Page: 81 / 132

CONVERSip EP100 User

Sept

‘04

Comdial

To enable DND, proceed as follows.

1. Select OPTIONS.
2. Select NEXT until the DND

option appears.

3. Select DND.
4. Select ON.
5. Select EXIT.
6. Press SPEAKER to end.

Note:

Although it does not appear on your screen while Do Not

Disturb is displayed, the right soft key activates the Options menu.

To disable the DND condition, proceed as follows.

1. Select OPTIONS.
2. Select NEXT until the DND option appears.
3. Select DND.
4. Select OFF.
5. Select EXIT.
6. Press SPEAKER to end.

To set a Do Not Disturb condition at
your telephone when a call rings at your
station,

1. Hear ringing and notice incoming

call information in display.

2. Select DND. Ringing stops, and

the caller hears the do not disturb
tone. Your telephone remains in
DND until you disable the feature.

7.4 Automatic Redial

If your station has the multiple automatic redial feature enabled, you
can place up to 10 numbers in your telephone’s redial queue.

Do Not Disturb

OFF<

EXIT

Setting Do Not Disturb

J Doe Ext 321

DND

ANS

Blocking Calls with DND

Summary of Contents for CONVERSip EP100





































































































































Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands

Comdial CONVERSip EP100, User Manual

Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands