Comdial CONVERSip EP100 User Manual Download Page 86

Page: 86 / 132

Other Advanced Features

Comdial

Sept

‘04

• The

recorder mode

allows you to send your voice and that of

the distant party to a tape recorder.

• The

ringer mode

allows an external speaker to sound the

ringing of your telephone.

• The

pager mode

allows an external paging device to sound

all voice announcements (all-call, zone paging, voice
announced intercom calls) sent to your telephone.

Note

: The recorder, external ringer, or pager requires external

power.

Program the enable/disable buttons (at any blank programmable
button location) as follows:

1. Select OPTIONS.
2. Select NEXT until the FEAT

option appears.

3. Select FEAT.
4. Select NEXT until the desired

options appear.

5. Select desired auxiliary feature:

•   APAGE to choose pager
•   ARECD to choose recorder
•   ARING to choose external ringer
•   HDSET to choose headset

6. Press blank programmable button

location to serve as enable/dis-
able button for the feature you’ve
selected.

7. Return to previous steps to add

another device, or select
SPEAKER to quit.

To enable an auxiliary mode, select enable/disable button to enable
mode. The light associated with button turns on and the display
denotes feature.

SPKR to Quit

DSS

FEAT

Programming Button

Program Button

ARING

HDSET

Selecting a Feature

Summary of Contents for CONVERSip EP100





































































































































Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands

Comdial CONVERSip EP100, User Manual

Search results

Summary of Contents for CONVERSip EP100

Reviews:

Related manuals for CONVERSip EP100

Brands by name

Popular brands