C25000 O&S Manual
8
C25000-OM-EN-05
Carousel Indicator Light
The carousel indicator light is only used when the
machine is in sideward mode.
When the front wheels are steered in to a certain
position, the carousel indicator light will illuminate. It is at
this point that the carousel mode is activated and the
machine can turn on its own axis.
To deactivate the carousel the operator simply steers
the wheels out of the carousel position.
Fuel Gauge
The fuel gauge displays how much diesel is in the
diesel tank.
This gauge located on the dash (see figure 1.2 item
number 8)
Drive Cutout Override Button (Optional)
This optional feature uses a push button switch, which is
connected to a sensor on high-lift Triplex masts.
When the mast is above 3.5m (138”)
high, the machine
will not drive.
To re-commence driving the operator must either:
Lower the forks of the machine using the lift
control lever
OR
Press the drive cutout override button located
on the dash.
Window Wiper Switches
There are 2 window wiper switches on the machine.
The right hand side window wiper switch shown opposite is
located in the top right hand corner of the cabin. This rocker
switch activates the wiper by flipping it to the on position.
See Item 18 in figure 1.2 on page 5.
The front window wiper switch shown opposite is located on
the dash. See Item 4 in figure 1.2 on page 5.
The 2 position rotary switch activates the wiper by turning it
to the on or ‘I’ position.
90° Light – Optional (Green Light On Dash)
This light illuminates when the swivels are in the 90°
position (sideward mode) indicating that it can be
driven in a guided aisle.
0
1/2
1/1