C25000 O&S Manual
21
C25000-OM-EN-05
Double fork load if necessary until load is tight against face of forks. (See
section on “double forking”)
Tilt rearward to secure the load.
Raise load above platform height.
Retract mast fully.
Lower forks until load is just above platform height. Rest the load on the
platforms where possible.
2.14: When Loading in Forward Mode
Lower/raise forks to the required height.
Enter the centre of the load.
Drive as close to the load as possible.
Extend mast to secure load if not already extended
Apply parking brake.
Lift load.
Tilt rearward to secure load.
Raise load above platform height.
Retract mast fully
Double fork load if necessary until load is tight against face of forks.
Lower forks until load is just above platform height. Rest the load on the
platforms where possible.
2.15: Placing a Load When In Sideward Mode
Drive the front of the machine as close to the placing area as possible.
Apply parking brake.
Lower/raise the forks to the required height.
Extend mast.
Lower load.
Tilt forward.
Retract mast fully.
Release parking brake.
Continue to drive in the sideward direction
NOTE
When handling long length loads, drive whenever possible in sideward mode.
Tilt elevated loads forwards, only when directly over load destination.
2.16: Placing a Load When In Forward Mode
Drive the front of the machine as close to the placing area as possible.
Apply parking brake.
Lower/raise the forks to the required height.
Extend mast.
Lower load.
Tilt forward.
