C25000 O&S Manual
18
C25000-OM-EN-05
2.5: Entering and exiting the operator Cabin
When entering or exiting the Operator cabin of the Combilift, always use a
three point contact method to avoid slips and falls. The three point contact
method is applied by keeping 3 of the bodies 4 limbs (hands & feet) in
contact with the machine.
Always use the handles and footsteps on the machine.
NEVER use the steering wheel as a handle.
2.6: Starting Procedure
NOTE
Engine will not start if the direction control switch is not in the neutral position.
Diesel Engine
Move the direction control switch to neutral
Insert the key into the ignition switch and turn clockwise to the
preheat position. The charge indicator lamp must light up.
Depress the accelerator.
Turn the ignition key further clockwise to the “Start” position. After
the engine starts, release the ignition key which will return
automatically to the ON position.
Check that all the indicator lamps are extinguished and that all
gauges are registering correctly.
Cold Starting
When the ambient temperature is cold, turn the key to the preheat
position and wait about 10 seconds until the glow plug indicator
lamp extinguishes before turning the engine.
WARNING
When the machine is started the wheels will remain in whatever position they
were in when the machine was stopped until the user selects a direction of
travel on the directional control switch
CAUTION
The starter must not be operated continuously for more than 30 seconds. If
the engine does not start, return the key to the ‘OFF’ position and wait 10
seconds before trying again.