C25000 O&S Manual
42
C25000-OM-EN-05
Note
Screw the housing fully home onto the head.
DO NOT TIGHTEN THE HOUSING EXCESSIVELY.
CAUTION
DO NOT DRIVE THE TRUCK OR OPERATE THE STEERING OR ANY OF
THE HYDRAULIC FUNCTIONS WHILE ANYONE IS INSIDE THE FRAME.
i.e. IN THE SPACE BETWEEN THE BACK OF THE MAST AND THE BACK
OF THE TRUCK.
5. If the visual indicator is dirty in can be cleaned be extending the mast
and entering the frame of the machine.
6. Take care when entering and exiting the frame of the machine as
surfaces may be slippery.
To replace the High Pressure Inline Filters:
1. Depressurise the hydraulic system and clean the filter body.
2. Unscrew the filter housing using the appropriate tools and extract the
spent filter cartridge.
3. Collect the spent oil and cartridge in a suitable container and dispose of
them in accordance with environmental protection regulations.
4. Check the thread on the filter housing and the thread and seal on the
filter head for cleanliness and clean if necessary.
5. Check the condition of all seals and change if necessary. Lubricate new
seals with operating fluid prior to installation.
6. Lubricate the seal on the new filter element with the operating fluid and
place the new filter element into the filter housing. Only use a genuine
Combilift component.
7. Screw the housing back onto the head using an appropriate tool.
8. Start the truck and check the filter for leaks. Repeat this check when the
truck has reached its normal operating temperature.
