C25000 O&S Manual
41
C25000-OM-EN-05
Hydraulic Tank Breather:
(Service Interval = 2000 Hours)
The breather located on the top of the hydraulic tank, must be replaced at
intervals of every 2000 hours (or 24 months depending on which occurs first).
To replace the Tank Breather:
1. Clean the area around the breather then unscrew and remove the used
breather.
2. Fit a new breather with a new seal and screw into the tank breather
port. Hand tighten only.
High Pressure Inline Filters:
The high-pressure inline filter on the drive circuit - located inside the engine
compartment - must be replaced at intervals of every 500 hours.
The high-pressure inline filter on the steering & hydraulic
functions circuit - located at the back of the truck above the
rear swivel – includes a visual indicator that changes from
green to red when the filter element gets clogged. The visual
indicator must be inspected weekly. If the colour inside the
window changes from green to red the filter element must be
replaced.
One of the hydraulic functions must be in use while inspecting the visual indicator as
the indicator will return to green in the absence of hydraulic pressure.
Two people are required to inspect the visual indicator, one to operate the joystick in
the cabin and another to visually inspect the indicator.
In order to inspect the visual indicator:
1. Fully retract and raise the mast to allow a clear view of the visual
indicator from the front of the truck.
2. Operate the tilt back function while inspecting the colour inside the
window of the visual indicator.
3. If the colour is green the filter is operating correctly.
4. If the colour is red the filter is clogged and must be replaced.
Drive Circuit High
Pressure Inline Filter
Located Inside
Engine Compartment
Steering & Hydraulic
Functions Circuit High
Pressure Inline Filter
Located At Back Of
Truck
