78
132
-
The head of the 2
nd
stage (B) is made of
aluminium (Fig. 131), the valves are screwed
in; the intake valve inside is removed using a
special pin wrench while the discharge valve
is on the outside and is removed with a non-
adjustable wrench or a box wrench.
-
The head of the 3
rd
stage (C) is made of
aluminium (Fig. 132), the intake valve is
screwed inside and is removed using a special
pin wrench while the discharge valve is on the
oustide and is kept in position by the threaded
dowel which is screwed into the cover.
11.10
Cylinders
After removing the cylinders, it is necessary to
check, when they are replaced, that the piston
at the maximum point and the upper edge of the
cylinder are on the same level (Fig. 133).
Adjust any differences that there may be by
making the base of the cylinder thicker using
gaskets.
133
131
Maintenance
Summary of Contents for MCH 13/DH
