50
78
Move the accelerator control lever into position
to obtain the required number of revs (Fig. 77).
Run the compressor for about 10 minutes then leave it at a standstill for 20 minutes.
Check the level of the lubricating oil of the pump
unit by looking at the indicator (Fig. 78).
If the level is too low, top the oil up following the
instructions given in the previous paragraph.
If the level is too high, discharge some of the oil
as described in chapter 11.4 “Changing the
lubricating oil”.
To dispose of the oil, refer to chapter 10.2,
“Disposal of waste”.
The operation to check the level of the lubricant must be carried out when the machine arrives and then
before starting up the compressor. It must be remembered that if the level is too low or too high it may
compromise the running of the compressor.
77
8.2.3
Models with diesel fuel supply
AIR FILTER
CAUTION
Never run the engine without the air filter. The engine would certainly be damaged.
Start and stop
Summary of Contents for MCH 13/DH
