ColorKey CKW02-C192, User Manual

Page: 9 / 26

6/21
DMX 512 CONTROLLER SERIES
Scanner refers to a lighting instrument with a pan and tilt mirror; however, in the
ILS-CON controller it can be used to control any DMX-512 compatible device as
a generic fixture.
MIDI is a standard for representing musical information in a digital format. A
MIDI input would provide external triggering of scenes using midi device such as
a midi keyboard.
Stand Alone refers to a fixture
’
s ability to function independently of an
external controller and usually in sync to music, due to a built in microphone.
Fade slider is used to adjust the time between scenes within a chase.
Speed slider affects the amount of time a scene will hold its state. It is also
considered a wait time.
Shutter is a mechanical device in the lighting fixture that allows you to block the
lights path. It is often used to lessen the intensity of the light output and to strobe.
Patching refers to the process of assigning fixtures a DMX channel or.
Playbacks can be either scenes or chases that are directly called to execution by
the user. A playback can also be considered program memory that can be recalled
during a show.
3.OPERATING INSTRUCTIONS
3.1 Setup
3.1.1 SETTING UP THE SYSTEM
1) Plug the AC to DC power supply to the system back panel and to the
mains outlet.
2) Plug in your DMX cable(s) to your intelligent lighting as described in
the fixtures respective manual. For a quick Primer on DMX see
the“DMX Primer” section in the Appendix of this manual.
3
33
.
..
1
11
.
..
2
22 FIXTURE ADDRESSING
The Controller is programmed to control 16 channels of DMX per fixture, therefore
the f ixtures you wish to control with the correspondin
“
SCANNER
”
buttons on
the unit, must be spaced 16 channels apart.