ColorKey CKW02-C192, User Manual

Page: 18 / 26

USER MANUAL
13/ 21
DMX 512 CONTROLLER SERIES
5) Press AUTO DEL button to delete the step/scene. All LEDs will blink.
3.4.8 DELETE A CHASE
Action: Notes:
1) Press and hold the PROGRAM button to enter
program edit mode.
2) Press the CHASE button (1~6) to be deleted.
3) Press and hold AUTO DEL button and the
selected CHASE button to delete the chase.
All LEDs will blink
3.4.9 DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory.
The individual scenes and program banks will be preserved.
Action :
1) Turn OFF power of controller.
2) Press and hold the BANK DOWN
button and the AUTO DEL button while
turning ON the controller.
3) All LEDs will blink.
Notes :
3.5 Scene Programming (Steps)
3.5.1 INSERT A SCENE
Action :
1) Press and hold the PROGRAM
button to enter programming mode.
2) Press the desired CHASE button.
3) Press the TAPSYNC DISPLAY to switch
the LED display to steps view.
4) Use the BANK UP/DOWN buttons to
navigate steps and locate the insert point
of the new scene.The display will read
the step number.
5) Press MIDI/ADD button to prepare the
insert.
6) Use the BANK UP/DOWN button to
locate the SCENE.
7) Press the SCENE button that corresponds
to the scene to be inserted.
8) Press MIDI/ADD button to insert the
scene. All LEDs will blink.
Notes :
I.e. To insert a scene between Steps 05
and 06 navigate using BANK buttons
until the display reads STEP05.
The display will show STEP006 at this
time.
3.5.2 COPY A SCENE
Action :
1) Press and hold the PROGRAM
button to enter programming mode.
2) Select the BANK that contains the
scene to be copied using the BANK
UP/DOWN buttons.
3) Press the SCENE button that
corresponds to the scene to be
5) Select the destination BANK that
contains the scene memory to record onto
using the BANK UP/DOWN buttons.
6) Press the desired SCENE button to
complete copy.All LEDs will blink.
Notes :
Copied.