ColorKey CKW02-C192, User Manual

Page: 10 / 26

USER MANUAL 7/21
DMX 512 CONTROLLER SERIES
FIXTURE
OR
SCANNER #
DEFAULT DMX
STARTING ADDRESS
BINARY DIPSWITCH SETTINGS
SWITCH TO THE
“
ON
POSITION
”
1 1 1
2
17 1,5
3
33 1,6
4
49 1,5,6
5 65 1,7
6 81 1,5,7
7
97 1,6,7
8
113 1,5,6,7
9
129 1,8
10
145 1,5,8
11
161 1,6,8
12
177 1,5,6,8
Please refer to your individual fixture ’ s manual for DMX addressing instructions.
The table above refers to a standard 9 dipswitch binary configurable device.
3
33
.
..
1
11
.
..
3
33 PAN AND TILT CHANNELS ASSIGNMENT
Because not all intelligent lighting fixtures are alike or share the same control attributes, the
Controller allows the user to assign the wheel the correct pan and tilt channel for every
individual fixture
Action :
1) Press and hold PROGRAM
& TAPSYNC/DISPLAY button at the
same time to access the number and are
labeled on the surface of the channel
assignment mode.
2) Press a SCANNER button that represents
the fixture whose faders you would like to
re-assign.
3) Press the TAPSYNC DISPLAY button
to select pan / tilt.
4) Move one fader of 1-8 or 9-16 channel at
different page to select the target PAN/ tilt
channel you wish be assigned to. LED
display 1
st
& 2
nd
show X channel number
and 3
rd
& 4
th
indicate Y channel number you
set
5) Press and hold PROGRAM &
TAPSYNC DISPLY buttons to exit and
save setting. All LEDs will blink.
Notes :
All pan/tilt can be reassigned to
output on a different DMX channel.
Press
AUTO/DEL buttons to delete
the channel assignment mode.