ColorKey CKW02-C192, User Manual

Page: 17 / 26

DMX 512 CONTROLLER SERIES
3.4.4 EDIT CHASE (COPY BANK INTO CHASE
Action:
1) Press and hold the PROGRAM button to enter
Notes:
programming mode.
2) Press the desired CHASE button.
3) Select the BANK to be copied using the
BANK UP/DOWN button
4) Press MUSIC/BANK COPY button one time to
prepare copy.
5) Press MIDI/ADD button again to copy the bank.
All LEDs will blink.
3.4.5 EDIT CHASE (COPY SCENE INTO CHASE)
Action :
1) Press and hold the PROGRAM button
to enter programming mode.
2) Press the desired CHASE button.
3) Select the BANK that contains the scene to
be copied using the BANK UP/DOWN
buttons.
4) Press the SCENE button that
corresponds to the scene to be copied.
5) Press MIDI/ADD button to copy the
scene.
All LEDs will blink.
Notes :
3.4.6 EDIT CHASE (INSERT SCENE INTOACHASE)
Action :
1) Press and hold the PROGRAM
button to enter programming mode.
2) Press the desired CHASE button.
3) Press the TAPSYNC DISPLAY to switch
the LED display to steps view.
4) Use the BANK UP/DOWN buttons to
navigate steps and locate the insert point
of the new scene.The display will read
the step number.
5) Press MIDI/ADD button to prepare the
insert.
6) Use the BANK UP/DOWN button to
locate the SCENE.
7) Press the SCENE button that corresponds
to the scene to be inserted.
8) Press MIDI/ADD button to insert the
scene. All LEDs will blink.
Notes :
I.e. To insert a scene between Steps 05
and 06 navigate using BANK buttons
until the display reads STEP05.
The display will show STEP006 at this
time.
3.4.7 DELETE A SCENE IN A CHASE
Action :
1) Press and hold the PROGRAM
button to enter programming mode.
2) Press the desired CHASE button that
contains the scene to be delete
Notes :
3) Press the TAPSYNC DISPLAY button to
switch the LED display to steps
4) Select the scene/step to be deleted using the BANK UP/DOWN buttons