ColorKey CKW02-C192, User Manual

Page: 13 / 26

DMX 512 CONTROLLER
SERIES
Action :
1) Press the AUTO DEL button repeatedly
until the MANUAL LED is lit.
2) Select a SCANNER button.
3) Move faders to change fixture attributes.
TAPSYNC DISPLAY button:
Press to toggle the output indicator on the
LED display between DMX values (0-255)
and percentage (0-100)
3.2.2 REVIEW SCENE OR CHASE
Notes :
All changes made while in
Manual Mode are temporary and
will not be recorded.
This instruction assumes that you have already recorded scenes and chases on the
controller. Other wise skip section and go to programming.
Action : (SCENE Review)
1) Press the AUTO DEL button repeatedly
2) until the MANUAL LED is lit. All AUTO
Trigger led and Music Trigger led OFF.
Move all siders at bottom
3) Select any one of the 23 banks by pressing
the BANK UP/DOWN buttons.
4) Select a SCENE button (1~8) to review.
5) Move faders to change fixture attributes.
Action : (CHASE Review)
1) Keep pressing PROGRAM button 2
seconds to enter program mode and the
indicated led will lit..
2) Press any one of the 6 CHASE buttons.
3) Press the TAPSYNIC/DISPLAY button
to view the step number on the display.
4) Press the BANK UP/DOWN buttons
review all scenes in the chase.
3.3 Programming
Notes :
Make sure you are still in MANUAL Mode.
A program (bank) is a sequence of different scenes (or steps) that will be called up
one after another. In the controller 23 programs can be created of 8 scenes in each.
3.3.1ENTERING PROGRAM MODE
1) Press the Program button around 2 seconds until the LED blinks.
3.3.2CREATE A SCENE :
A scene is a static lighting state. Scenes are stored in banks. There are 23 bank
memories on the controller and each bank can hold 8 scene memories. The
controller can save 184 scenes total.
Action :
1) Press the PROGRAM button until the
LED blinks to enter program mode.
2) Select the SCANNERS you wish to
include in your scene.
3) Compose the effect by moving the sliders.
The relative DMX value will be displayed
on led display
4) Tap MIDI/ADD button to save setting.
5) Choose a bank by BANK UP/DOWN
(01~23) to save it to your target BANK.
Notes :
Deselect Blackout if LED is lit.
You can select more than one fixture.
There are 8 scenes available in every bank.
All LEDs will flash to confirm. The LED
display will now indicate the Scene
number and Bank number used.