Page | 42
VASTRAJET
•
Spray setting
o
Auto Spray
: Set the duration (number of passes) for auto spraying.
o
Spray Period
: Define the duration for spraying (set as 10000). If the duration increased,
spray frequency gets decreased.
o
Print Pre-spray Time
: This option works when the
Spray Before Print
option is enabled and
used for defining the duration, if spray before issuing the Print command.
o
Idle Spray
: Spray during carriage at home position. This option must be enabled.
o
Spray Before Print
: This option works with the
Print Pre-spray Time
option. When enabled,
one can specify the duration, if spray before issuing the
command.
The
Move
tab is shown in the image below:
Fig 48: Displaying the Move Tab
Using the
Move
tab, the Y Speed can be updated as per the requirements.
The
Preference
tab is shown in the image below:
Fig 49: Displaying the Preference Tab
Using the
Preference
tab, the measuring unit can be set or changed.
