Page | 46
VASTRAJET
10. Loading the Fabric
Follow these steps to load the fabric:
Step 1:
Keep the well pressed and pre-treated fabric roll winded into the empty core of diameter 65-70mm.
Step 2:
Insert the supply roller into the core of the fabric roll.
Step 3:
Attach the core holders on both ends and tighten them with the help of knob.
Step 4:
Remove the roller stopper pin and place the supply roller into the rear of the machine, as shown in
the image below:
Fig 55: Placing thee Supply Roller into the Rear
Step 5:
Pull out the fabric and roll it, passing through the fabric tensioner and onto the fabric guiding rods,
as shown in the image below:
Fig 56: Displaying Path of Fabric
Step 6:
Carefully stretch the fabric stretched to keep it wrinkle free and easily pass below the press roller.
Additionally, pull down the press roller through toggle handle.
