Page | 14
VASTRAJET
5. Getting Ready the Machine
Follow these steps to ready the machine:
Step 1:
Place the machine in levelled or even surface.
Step 2:
Unwrap the machine and it’s related parts.
Step 3:
Open the Carriage Lock.
Step 4:
Carefully remove the washing tub and water tank.
Step 5:
Connect water pipes.
Step 6:
Connect power cables to the machine.
Step 7:
Switch ON the Conveyor Belt.
Step 8:
Adjust the belt tightness as per the fabric requirements.
Step 9:
Check the shifting of belt by running it for half an hour (minimum).
Step 10:
Fix the water tub and fill it with water.
Step 11:
Run the Wash Cycle for 15 minutes.
Step 12:
Check the adhesiveness of glue. If glue coating is damaged during unloading and unpacking, then
again recoat the glue and wait for 4 hours to get it dry. Initially, glue coating is done by the company.
Step 13:
Load the fabric and make the desire settings accordingly.
Step 14:
Power ON the Print Engine.
Step 15
: Install the Waste Bottle.
Step 16:
Fill Ink in main ink tanks.
Step 17
: Set Carriage height.
Step 18:
Install the Printer Manager software.
Step 19:
Perform Nozzle Test and calibration checks for ensuring the printing quality.
Step 20:
Connecting USB cable to the printer.
Step 21:
Start printing.
Now, the machine is ready to use.
Note:
Before initializing the machine, manually move the carriage to check for any obstacle and switch ON
the Print Engine to verify whether everything is OK or not.
