Cole Parmer MB-200-40, Instruction Manual

Page: 30 / 60

Page 27 of 60
8.0 PRINT RESULTS
If the test parameters are set to allow the test results to be printed (see
section 6.1.1) then the results of the test are printed both before and after the
test is complete. The initial part of the printout will show the test conditions. If
the test printing parameter has been set to complete then the results will be
printed at the interval time. When a test is completed, the user can print a
result from the test.
8.1 PRINTING FINAL TEST RESULTS
While the final values for the test are being displayed after the test has
ended, press the [Print/
   
] key to output the final results. The format of
these results is the same as the last lines of the complete printout:
LAST TEMP: 111C
TEST TIME: 05:30 Min
FINAL MASS: 11.820 g
MASS LOSS: 0.521 g
RESULT: 4.27 %M
© 2022