Cole Parmer MB-200-40, Instruction Manual

Page: 28 / 60

Page 25 of 60
The top line will show the elapsed time of the test and the chamber
temperature. The main display will show the current result, updated at the
interval time selected when setting test parameters.
An “A” will be on the left side of the display if %Moisture /Dry or %Solid/Dry is
the result selected. The %M or %S will be on the right side of the display
showing %Moisture or %Solid.
The display will continue to be updated at the time interval set for the test.
During the test the [Dspl/ ] key can be pressed to see other information
such as current mass, %Solid, time remaining if time limit is set for the test.
Each alternate display is shown for 5 seconds then returns to normal display,
or if [Dspl/ ] is pressed again to go to the next alternate display.
Current Mass
% Solid
Atro Moisture
03:45 RA 100
ºC
16.12
%
03:45 100
ºC
4.756
g
SOLID
83.88
%
ATRO MOIST
3.78
%
© 2022