Page 46 of 60
11.6 CONTINUOUS
OUTPUT
The balance can use the interface to send the weight only to the output. This
setting is configured in the Serial Communications parameters, see section
10.1.1. When the output is set for Continuous the test reports are not printed
during a drying test and test results are not stored.
The weight will be printed using the time interval set with the Continuous
parameters, from 01 to 99 seconds.
The format is xxxxxxxxx<cr><lf> where the first 9 characters are the weight
with leading zeroes replaced by spaces. The first character may be a “-“ for
negative weight.
The output will appear as:
_ _ _ 12.345
_ _ _ 12.345, etc.
Summary of Contents for MB-200-40
