Cole Parmer MB-200-40, Instruction Manual

Page: 8 / 60

Page 5 of 60
3.2 ASSEMBLING
THE ANALYZER
For best performance, let the analyzer warm up for 30 minutes before using.
Locate the balance on a solid
surface, free from vibration with
good ventilation around it.
Place the lower reflector (1) into
the base of the weighing chamber
Gently place the pan support (2)
into the access hole. Rotate to
position.
Place the sample pan lifter (3) into
the weighing chamber, rotate so
the tangs on the lifter do not
interfere with the pan supports
and the handle exits the chamber
using one of the gaps in the
cover.
Place an empty aluminium
weighing tray (4) on the pan
support
Level the balance using the
adjustable feet and spirit level
For some applications it is desirable to run the analyzer in a dummy run to
warm up the weighing chamber and the surrounding area before doing the
actual test. See section 14 for other ideas to help ensure accurate test
results.
© 2022