3. Insert the power supply's +24VDC (Power) wire to Pin 1 and the -24VDC (Return) wire to Pin 2 on the power
connector. Connect a frame ground wire from Pin 3 to frame ground. Recommended wiring is 14 - 18 AWG, solid
or stranded wire. Refer to
24VDC Power Connector Terminal Assignments
for terminal pin
assignments.
CAUTION
:
Do not connect AC power directly to the vision controller's power connector. Connecting AC
power will damage the vision controller.
4. Tighten the wire retention screws to secure the wire leads in the terminals; the maximum torque is 0.6 Nm (5.3
in-lb).
5. Insert the power connector into the vision controller's 24VDC power port. Tighten the connector screws to secure
it to the vision controller.
6. Restore power to the 24VDC power supply and turn it on if necessary.
27
Installation
