24VDC Power Connector Terminal Assignments
The 24VDC power connector is used to connect an external power supply to the vision controller. Recommended wiring
is 14 - 18 AWG, solid or stranded wire.
CAUTION
:
The maximum torque that can be applied to the 24VDC power connector is 0.6 Nm (5.3 in-lb). Applying
torque above this limit can damage the connector.
Pin Number
Signal Name
1
+24VDC (POWER)
2
-24VDC (RETURN)
3
FRAME GROUND
37
Specifications
