Standard Components
The vision controller is shipped with the components listed below.
Note
:
l
If any of the standard components appear to be missing or damaged, immediately contact your Cognex
Authorized Service Provider (ASP) or Cognex Technical Support.
l
The number and type of cameras included with the vision controller will vary based on the product kit.
l
Cables are sold separately.
Component
Description
1
In-Sight VC200
Vision Controller
Provides connection of up to four cameras, 8 inputs, 16 outputs, USB and SD
storage capability and connection to a Gigabit Ethernet network.
2
Terminal Block Kit
l
INPUTS terminal blocks
l
OUTPUTS terminal blocks
l
24VDC power connector
3
ISC-8402 Camera 2 megapixel, monochrome, global shutter camera that provides image
acquisition, vision processing, job storage, Ethernet connectivity and access to
a strobe device.
4
ISC-8405 Camera
and Ferrite
5 megapixel, monochrome, rolling shutter camera that provides image
acquisition, vision processing, job storage, Ethernet connectivity and access to
a strobe device. Ferrite included for attachment to the accessory Breakout
cable.
11
Introduction
