COBHAM SEA TEL 9711IMA-70, Installation Manual

Page: 95 / 178

9711IMA-70 Maintenance
15-7
15.4.1. Components of the feed:
Waveguide Rotary Joint (TX Port)
Receive Port (in foreground)
Circular Section Drive Motor (this selects LHCP, or
RHCP mode of the feed).
Circular Section Potentiometer
Circular Alignment Pin & Notches (underside)
Circular Limit Switches (in background)
Circular Section Motor Termination PCB
Linear Section Drive Motor (when in Linear mode,
this drives to the targeted linear polarization).
Linear Section Motor Termination PCB
Linear Section Potentiometer
Linear Alignment Hole (top of Sprocket)
Linear Limit Switches (in background)
Drop-In feed (mounts into Scalar Plate)
15.4.2. Tools Required:
•
PC with ProgTerm installed
•
USB cable, Type A to mini USB
•
2mm Allen Key
•
3mm Allen Key
•
½” Open-End Wrench
15.4.3. PC Computer Setup (ProgTerm):
NOTE: Before beginning procedure, ensure that ProgTerm is installed on the computer being used for
testing. If not, download and install ProgTerm version 1.51 or better from the Sea Tel support site.
1. Power Pedestal ON and allow to complete initialization.
2. Power computer ON.
3. Connect your PC/Laptop computer to the PCU using USB Type A to mini-USB cable.
4. On the computer, open ProgTerm.
EAR Controlled - ECCN EAR99