COBHAM SEA TEL 9711IMA-70, Installation Manual

Page: 39 / 178

9711IMA-70 Installation
3-19
7. Mount the C-Band RF
Equipment on the left side of
the pedestal, assuring the
waveguide port is facing up
(foreground of this view).
Waveguide port
8. Connect AC Power cable.
9. Connect RF Input. cable.
10. Connect M&C cable. Using a
small flat blade screwdriver,
tighten the retaining screws.
11. Locate the BUC Ground Strap
on the left side of the
equipment frame.
12. Cut the red cable ties.
13. Extend the ground strap.
14. Route the ground strap to the
ground stud on the case of
the RF Equipment (BUC).
15. Attach the ground strap to
the ground stud on you BUC
(your BUC may look different)
and tighten the hardware.
EAR Controlled - ECCN EAR99