Satellite profiles and VSAT modem profiles
6-22
Chapter 6: Configuration
98-146706-A
6.4.3
To set up blocking zones (RX and TX)
You can define blocking zones, i.e. NO TX and RX zones, enter azimuth values and elevation
angles for each blocking zone
.
To enable a blocking zone you must select
Active
.
To define and set a blocking zone, do as follows:
1. Select
SETTINGS > Blocking zones
.
2. Select
Active
to enable the blocking zone.
Figure 6-17: Web interface: SETTINGS, Blocking zones — azimuth and elevation
SAILOR900Ka-IM-98-146706.book Page 22 Thursday, July 16, 2015 11:07 AM
