Calibration
98-146706-A
Chapter 6: Configuration
6-11
Confi
guration
6.2.5
Manual One Touch Commissioning (BUC calibration)
When the modem starts up for the first time it will automatically register with the BUC and
perform P1dB compression and thereafter register with the network. During the P1dB
compression the antenna will point away from the satellite and the ACU will show
BUC
calibration
on the
DASHBOARD
and the ACU display.
If a new cable calibration is made, the ACU displays the alarm
BUC calibration outdated
.
Then you must make a One Touch Commissioning.
To make a One Touch Commissioning (OTC) for the modem, do as follows:
1. Connect a PC to LAN1.
2. Enter the web interface (via Firefox browser) and go to
SERVICE > Modem
.
3. At
Modem access
click the link.
WARNING!
For your safety: Active RF transmission
may occur during an OTC procedure. Software updates
may also occur, yet the system is in receive-only mode
during such auto-updates.
Important
You must use the Internet browser
Firefox
.
Figure 6-9: Web interface: SERVICE > Modem, Factory default
SAILOR900Ka-IM-98-146706.book Page 11 Thursday, July 16, 2015 11:07 AM
