Supported commands
D-10
Appendix D: Command line interface
98-146706-A
D.2.11
zone
Command
Description
zone
Shows the sub commands, unit and
description for the command
zone
.
zone <id> azimuth <start
angle> <end angle>
Sets the azimuth angles of the blocking zone
for one zone.
• Valid zones: 0 to 7
• Valid angles: 0 to 360
zone <id> elevation <start
angle> <end angle>
Sets the elevation angles for a blocking zone.
• Valid zones: 0 to 7
• Valid angles: 0 to 360
zone <id> tx_off <yes | no>
Enables or disables TX inside the blocking
zone.
zone <id> active <yes | no>
Enables or disables the blocking zone.
zone <id>
Shows the setting for the blocking zone.
Table D-12: UCLI command:
zone
SAILOR900Ka-IM-98-146706.book Page 10 Thursday, July 16, 2015 11:07 AM
