COBHAM SAILOR 60 GX, Installation Manual

Page: 96 / 192

Keypad and menus of the ACU
98-148248-C Chapter 6: Configuration 6-41
6666
Configuration
3. NAV : Navigational information
First letter:
G
(Valid GPS signal received from the GPS module) or
g
(No valid GPS fix)
Second letter: H (Valid ship heading data received from the ship’s gyro) or h (No valid
heading data).
4. MDM : Current status of the modem: TEST, ERROR, READY, INIT, RXOK, ACQ,
NETOK, RESET, OFF
5. LAN : LAN connectors used, 1 , 2 , 3 , 4 , – .
6.
SAT
: Longitude, satellite position of the currently active satellite profile.
7. RX:
1 (Rx1 Lock, - or 1 ),
- (Rx2 Lock, - or 2 ),
L
(RX polarisation of currently active satellite profile:
H
(horizontal),
V
(vertical),
L
(left-
hand)
R
(right-hand).
8. RF tracking frequency in GHz and LNB LO Frequency.
9.
TX
: <Extern mute> <Modem TX> <ADU TX> <TX pol>
Read the TX status as follows: Upper case: Ok, lower case: Not ok, -: unknown
<Extern mute> = [U,u]
<Modem TX> = [m,M]
<ADU TX> = [a,A]
<Tx pol>=[-,X,C,L,R]
After 1 hour the display is dimmed to lowest intensity. Press any key to light up the display.
6.6.2 Navigating the menus
Use the keypad to navigate the menus.
• Press OK or to select a menu item.
• Use the arrow keys and to go through the menu items or enter
a number, digit by digit.
• Use the arrow keys and to go through the settings and move
from one digit to the next.
• Press
OK
to select a setting.
• Press again to move one level up. If applicable, confirm to store the new setting by
pressing
OK
.
6.6.3 The menu tree
In the menu tree you can see how the system has been configured. To enter satellite
information directly, use a connected PC and the web interface.