Calibration
98-148248-C
Chapter 6: Configuration
6-9
6666
Configuration
Automatic azimuth calibration with an active satellite profile
You can enable automatic azimuth calibration, even if there is no line of sight to an azimuth
calibration satellite the place of installation. To be able to use this feature you must have
made a valid satellite profile and activate it. When the vessel leaves the harbour and gets
line of sight to the calibration satellite, the system automatically finds and tracks the
satellite and makes the azimuth calibration. After a successful azimuth calibration the ACU
will automatically disable the
Azimuth calibration (active satellite profile)
on the
page
SERVICE > Calibration
.
1. Create a modem profile, see
2. Create a satellite profile, see
3. Click
SETTINGS
and
Activate
the satellite profile.
4. Click
SERVICE > Calibration
.
6
No signal received. Check that there is free line of sight. Try again or try with
another satellite.
7
RF setup error, e.g. missing or invalid TX frequency.
8
Invalid satellite, e.g. satellite not visible.
9
Unknown error
Error code
Explanation
Table 6-4: Possible error codes during calibration (Continued)
Figure 6-6: Web interface: SERVICE, Calibration (example)
Summary of Contents for SAILOR 60 GX
Page 1: ...Cobham Public SAILOR 600 VSAT Ka SAILOR 600 VSAT Ka High Power Installation manual...
Page 116: ...Software update 8 12 Chapter 8 Service 98 148248 C Figure 8 11 Verifying software update...
Page 181: ...Telenor antenna approval G 4 Appendix G Approvals 98 148248 C...
Page 192: ...98 148248 C www cobham com satcom Cobham Public...
