COBHAM SAILOR 60 GX, Installation Manual

Page: 47 / 192

Installation of the modem
3-24 Chapter 3: Installation 98-148248-C
3.5 Installation of the modem
See the documentation of the iDirect X7 or the NEWTEC Dialog (Open AMIP) modem.
3.6 To connect the ADU, ACU and modem
The following sections show how to connect the ADU, ACU and the modem.
3.6.1 ACU with AC power (SAILOR 7016C)
3.6.1.1 iDirect X7 modem
1. Connect the antenna cable to
Antenna
at the ACU and the antenna.
2. Connect
Rx Out
at the ACU to
Rx In
at the modem with the supplied cable (75 Ohm
coax, F-F, 1 m).
3. Connect
Tx In
at the ACU to
Tx Out
at the modem with the supplied cable (75 Ohm
coax, F-F, 1 m).
4. Connect
RS-232
on the ACU to
Console (
RS-232) at the modem. Use the supplied X7
Modem BUC & Console to ACU cable.
5. Connect
RS-422
on the ACU to
BUC I/O
(RS-422
)
at the modem. Use the supplied X7
Modem BUC & Console to ACU cable.
6. Connect a PC at the
LAN3
interface (Service port) of the ACU for access to the web
interface for configuration.
7. Connect
LAN1
at the ACU to the RJ45 connector 1 at the modem.
Figure 3-24: Connection between ADU, ACU and iDirect X7 modem
1
2 3 4 5
6
7
AC power
AC power
Modem
ACU
Internet
To ADU
Service port for control PC