COBHAM SAILOR 60 GX, Installation Manual

Page: 111 / 192

To get support
98-148248-C Chapter 8: Service 8-7
8888
Serv
ice
To reset to factory default settings, do as follows:
1. Click the menu item ADMINISTRATION > Factory default .
2. Click
Reset to factory default
.
3. Click
Clear event history
to clear all registered events.
4. Click Reset Modem .
For details about
Modem access configuration
see Modem access configuration on
page 6-14.
8.1.3 Line up procedure (iDirect X7 modem)
The SAILOR 600 VSAT Ka has a line-up utility for testing the connection to the iDirect X7
modem.
The SAILOR 600 VSAT Ka has been tested at the factory and online on a live satellite link.
You can also make a line up and adjust the azimuth and elevation manually. Do as follows:
1. Open your Internet browser and enter the IP address of the ACU. The default IP address
is
http://192.168.0.1
.
2. Create a modem profile and a satellite profile using the previously created modem
profile (See Service profile for calibration on page 6-10).
3. Go to the page
SERVICE > Line up
.
Figure 8-4: Web interface: ADMINISTRATION > Factory default, ADU and ACU
Note
Calibration data for azimuth and cable calibration are not reset during factory
default.
Note
The ship must not move during the line-up procedure.