COBHAM explorer 727, User Manual

Page: 52 / 179

Chapter 3: To operate the system
98-126882-F To use a computer 45
To request a static IP (if subscribed to) from the Access Point you must type in the user
name and password from your airtime subscription.
Note for MAC OS: User name and password are required. Use user name
void
and
password
void
. This works for some ISPs. Contact your airtime provider for further
information.
• For setups that have a check box for “Enable LCP extensions”, deselect this.
No further configuration is needed to make a Standard IP data connection to the Internet.
See the table below for information on how to configure specific services for your PPPoE
connection.
If you need a certain service, for example a Streaming class, you must type in a specified text
string when asked for a service name. The following table shows the service names supported
by the terminal.
For a list of supported AT commands and their functions, refer to Supported AT commands
for PPPoE on page 155.
To track the terminal
The EXPLORER system can be used for tracking purposes. You can set up the terminal to report
its position to a server at certain time intervals or after moving a specified distance.
To use the tracking feature you must either set up a tracking server or get a tracking solution
from your service provider. The EXPLORER system must be set up to match this server. For
information how to set up the EXPLORER system, see
To set up Tracking on page 90. Once set
up on both sides, the EXPLORER system will send position reports to the server as specified.
Text to type in the
Service Name field
Function
(Blank) Initiates a Primary Standard Data connection (default)
XBB:BACKGROUND
Initiates a Primary Standard Data connection (Same as blank!)
XBB:STREAM32K
Initiates a Primary Streaming 32 kbps connection
XBB:STREAM64K
Initiates a Primary Streaming 64 kbps connection
XBB:STREAM128K
Initiates a Primary Streaming 128 kbps connection
XBB:STREAM176K
Initiates a Primary Streaming 176 kbps connection
a
a. Only available in X-Stream (on-the pause) mode. For further information, see Standard (on-the-move)
mode or X-Stream (on-the-pause) mode on page 38.
XBB:STREAM256K
Initiates a Primary Streaming 256 kbps connection
XBB:X-STREAM
Initiates a Primary BGAN X-Stream connection (from a minimum of
384 kbps up to approximately 450 kbps)
a
XBB:<AT String>
This allows the PPPoE clients to enter a full AT context activation
string.
Example:
XBB:AT+CGDCONT=1,ip,”bgan.inmarsat.com”