COBHAM explorer 727, User Manual

Page: 90 / 179

Chapter 4: To use the web interface
98-126882-F To set up the interfaces 83
To manage IP handsets
Overview
The terminal has 4 LAN (PoE) connectors for connection of IP handsets or other IP equipment.
You may connect your IP handsets directly to the LAN interfaces or use a PoE switch to
connect more handsets. The EXPLORER terminal supports connection of up to 16 handsets.
Each handset must have a local number in the range 0501 to 0516 as well as a unique
password. By default, handset numbers are automatically assigned when IP Handsets from
Cobham SATCOM are connected. However, you may want to change the password for the
handset. For further information, see the next section
To connect and configure IP handsets .
Note that if you
do not want your IP Handsets to automatically be assigned
a local
number and password, you can clear the setting
Settings > Start up options > Auto BGAN
SIP in the IP Handset menu.
To connect and configure IP handsets
If you want to view or change the settings for the new IP handset, do as follows:
1. Connect the IP handset to one of the LAN ports of the terminal.
If it is an IP Handset from Cobham SATCOM, the handset starts up and is automatically
registered and assigned the first available number.
2. In the web interface, select
SETTINGS > IP handsets
.
Note
The IP Handset with the local number 0501 is the master handset. This means you
can start/stop data sessions from the terminal with this handset, if the function is
allowed in the User permissions page. See
To set up user permissions on page 124.
Note
An IP Handset that is connected to the LAN interface on the terminal is by default
automatically registered in the terminal and assigned the first available local number
and a password, which is the same number as the local number.