COBHAM explorer 727, User Manual

Page: 56 / 179

Chapter 4: To use the web interface
98-126882-F Introduction 49
To access and navigate the web interface
To access the web interface
To access the web interface, do as follows:
1. Connect your computer to the terminal.
2. Start up the terminal.
For details, see To get started on page 12.
3. Open your browser and enter the IP address of the terminal in the address bar. The default
IP address of the terminal is
http://192.168.0.1
.
If your connected computer is set up to obtain a DNS server address automatically, you
should also be able to use
http://ut.bgan
which is then translated into the local IP address
of the terminal.
To change the language
When you have access to the web interface, if you want to display a different language than
English, select
SETTINGS > LANGUAGE
from the left menu, select a language from the list
and click Apply . For further information, see
To select the language
on page 108.
Note
If the IP address is changed and you do not have the new address, you can
temporarily set the IP address to the default value: Push the
Reset
button next to the
SIM slot in the connector panel of the terminal. You can then access the web
interface and change the IP address.
Note that if you do not change the IP address, the default IP address will only be valid
until the terminal is powered off. Then the terminal returns to the IP address from
before the Reset button was pushed.
For further information on the Reset button, see
Reset button on page 153.