COBHAM explorer 727, User Manual

Page: 122 / 179

Chapter 4: To use the web interface
98-126882-F Administration 115
Data limits
You can set a limit for the use of data services with the EXPLORER system. You either specify a
maximum number of MB for the standard data connection, and/or a time interval from start to
end for a streaming connection.
Once the entered limit is reached, the connection is automatically stopped. This is recorded in
the menu
CALLS , which contains a call log in which you can see information on standard and
streaming data sessions. To continue using the data services you must click on the desired
connection on the Dashboard to start a new connection.
To set data limits, do as follows:
4. From the left navigation pane in the
ADMINISTRATION
page, select
Data limits
.
5. Select the services to close automatically after a fixed amount of data or period of time.
For Standard data type in the number of mega bytes (MB) allowed.
For streaming classes select a period of time from the drop down list.
6. Click
Apply
to save the settings.
If you have entered the call charges in the menu
Call charges
, the system automatically
calculates and displays the maximum charges for your data sessions.
Note
If you set a data limit for the Standard data connection, automatic activation of the
Standard data connections is disabled.
Note
This page only shows the streaming classes available for the current usage mode.
This means that if the terminal is in Standard (on-the-move) mode, you will not
see BGAN X-Stream and Streaming 176.
Note
Cobham SATCOM does not take responsibility for the correctness of the estimated
charges. This calculation is only an estimate of the charge, based on the tariff entered
by the user. The airtime provider may have different methods to calculate the charge.