COBHAM explorer 727, User Manual, Page: 91 / 179

Chapter 4: To use the web interface
98-126882-F To set up the interfaces 84
3. If you want to change the password, click Edit next to the number you want to use.
4. Enter the password you want for your IP handset.
5. In the IP handset, enter the local number and the password you just entered in the web
interface. For the IP Handset from Cobham SATCOM do as follows:
a. In the IP Handset, enter the menu system (select
Menu
) and select
SIP
to get the list of
profiles.
b. Select the
BGAN profile and select Options (left softkey).
c. Select
Edit/View
and change the user name and password.
Note that the user name is also the local number for the handset.
If you have another IP handset, refer to the manufacturer documentation.
6. For IP Handsets from Cobham SATCOM: When the terminal and the handset have
recognized each other, a
Configure
link appears next to the handset in the list.
7. Select
Configure
next to an IP Handset to access the built-in web interface of the IP
Handset.
The web interface of the IP Handset opens. It is very similar to the web interface of the
terminal, but has a handset icon in the top left corner.
With the web interface of the IP Handset you can access the internal settings of the IP
Handset. For further information, refer to the user manual for the IP Handset.
The handset remains in the list after it is disconnected. When the handset is connected again, it
is automatically recognized and ready for use.
If you want to remove the handset from the list, click
Release
under
Actions
(the Release link
only appears when the handset is disconnected).
Note
The IP Handset from Cobham SATCOM only supports
numbers (no letters) in the password.
Note
For 3rd party handsets: Silence supp Enable must be set
to
no
in your IP handset. The phone should not stop
sending data packets even though there is silence and no
one speaks.