Setup with the web interface for PC
98-143492-D
Chapter 4: Setup and operation
4-15
Setup a
nd op
eration
• User permissions
• Display: brightness setting
To reset to factory default settings, do as follows:
1. Select
ADMINISTRATION > Factory default
.
2. Click
Reset to factory default
.
Reset to factory default - integrated GX modem
To reset the integrated modem to factory default, do as follows:
1. Select
SERVICE > Modem
.
2. In the drop-down box select the reset level:
• Level 0: Soft Reset – Power cycle of the GX modem
•
Do not use:
Level 2: Diagnostic Test Mode – Only connection to the GX modem is
the serial RS-232 interface, all other connections are shut down.
•
Do not use:
Level 3: Default Factory Configuration.
CAUTION!
Administrators only. Close this page for guest users, see
WARNING!
The system becomes inoperable if you select
Level 3: Default
Factory Configuration
in the drop down list.
Figure 4-12: Web interface: SERVICE > Modem, Factory default
Important
Note for level 2 and level 3: The GX modem may stop working. You may
have to upload new software.
